Overview

The nX7 and nX10 are all-in-one industrial controllers with integrated capacitive touchscreen display — 7” or 10” at 1024×600 resolution. Both share the same hardware architecture and software stack; the only difference is the display size.

Main Features

• CPU iMX6ULL Single Core ARM Cortex-A7, 800 MHz
• 1 GB Flash — 512 MB RAM
• Wide 7 to 40 Vac/Vdc single power supply
• 2 × 10/100 Ethernet interface
• 1 × microSD
• 1 × USB Host
• 1 × USB Device (Ethernet Gadget — CODESYS programmer and SSH)
• 1 × RS485
• 1 × RS232
• 1 × CAN
• FRAM 256 Kbit (non-volatile retain storage)
• RTC with battery
• RGB Status LED
• Display 7” (nX7) or 10” (nX10) — PCAP capacitive, 1024×600
• Linux Debian 9 Operating System
• CODESYS Runtime V3.5.16.40 — PLC, TargetVisu, WebVisu
• EtherCAT Master with configurator
• CANopen Master with configurator
• OPC UA Server
• CAS (CODESYS Automation Server) ready