Overview

The nX3E is an advanced CODESYS-programmable controller for industrial automation. It can operate as a simple logic controller or as a full motion controller with CODESYS SoftMotion, CNC and robotics libraries. A real-time operating system allows CODESYS task cycle times below 1 ms — typically down to 250 µs — with jitter normally under 20 µs.

Main Features

• CPU iMX6ULL — Single Core ARM Cortex-A7, 800 MHz
• 4 GB Flash — 512 MB RAM
• Wide 19 to 28 Vac/Vdc single power supply
• 2 × 10/100 Ethernet interface
• 1 × microSD
• 1 × USB Host
• 2 × CAN
• Micro UPS — retentive variable storage (128 kB)
• RTC with battery
• RGB Status LED
• Linux Debian 10 Operating System
• CODESYS Runtime V3.5.16.40 — PLC, WebVisu, SoftMotion, CNC, Robotics
• EtherCAT Master with configurator
• CANopen Master with configurator
• OPC UA Server
• CAS (CODESYS Automation Server) ready